Excel Dryer Cast Cover Model Hand Dryers and Hair Dryers

Push Button Activated Hand Dryers and Hair Dryers

Excel Hand Dryer 76-WExcel Hand Dryer R76-C

FEATURES:

SPECIFICATIONS


Construction

  1. Dryer cover shall be one-piece, heavy-duty, rib-reinforced die-cast zinc alloy. It shall be lightweight, unbreakable, rust-proof, fitted with a chrome plated die-cast zinc alloy push button, a fixed or 360° revolving die-cast, chrome plated, zinc alloy nozzle and a recessed instruction plate.
  2. All exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically-applied epoxy paint.
  3. Surface-mounted covers shall be fastened by two flat head, recessed tamper proof bolts to a cast zinc alloy wall plate. Recessed covers shall be fastened by four flat-head, recessed, tamper-proof bolts to wall box. Wall plate shall be fastened to the wall box by four concealed 1/4" (6mm) mounting bolts, and shall be equipped with three (3) 7/8" (22mm) diameter holes, one of which shall be suitable for use with surface conduit, for ease of wiring.
  4. Cover shall be equipped with an air inlet opening on the bottom of the casting and covered with a vandal resistant metal protective grill to prevent the entry of foreign objects. A chrome plated, die-cast zinc air outlet nozzle on the front of the cover shall permit a full flow of warm air when in operation, and shall be protected by a cast alloy grating fixed into the blower housing.
  5. All internal parts shall be coated according to Underwriters' Laboratories, Inc. requirements.
  6. Entire mechanism shall be internally grounded.
Underwriters' Laboratories, Inc. Listed
The entire dryer shall be listed under the re-examination service of Underwriters' Laboratories, Inc.


Mechanism

  1. Motor for 60 Hz units shall be capacitor-initiated, brushless type (for longer life and quiet operation) 1/10 H.P. 3450 R.P.M. with self-lubricating bearings. It shall be insulated by a resilient mounting and shall be protected by a self-resetting thermal switch 50 Hz units: Motor shall be a universal 1/10 H.P. 4200 R.P.M. at rated load with sealed lubricated ball bearings. It shall be insulated by a resilient mounting. Motor is thermally protected.
  2. Fan shall be a large, single inlet centrifugal type for maximum capacity, and shall deliver 150 C.F.M. Fan shall be mounted directly on the motor shaft, and fan and motor unit shall be insulated from dryer with a resilient rubber mounting to obtain maximum dampening effect.
  3. The heating element is constructed of Nichrome wire and side mounted on the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat which shall open whenever air flow is cut off and shall close when flow of air is resumed. The element shall produce an air temperature of 145°F/63°C at a 72°F/22°C ambient room temperature at the outlet.
  4. The timer is a state of the art electronic device with an adjustable time cycle. For hand dryers, timers are set at 30 seconds and at 3 minutes for hair drying.

Unlimited Warranty

All parts on Hand and Hair Dryers shall be warranted against defective material and/or workmanship for a period of ten years. Warranty shall include factory performed labor as well as the repair or exchange of defective parts at manufacturer's option, and shall include damage due to accidents, misuse or vandalism.

Surface Mounted Dimensions: 10 3/4 lg. x 8" high x 7" deep  (273mm x 203 mm x 178 mm)
Weight: 18 lbs. (8.1 Kgs.)
Recessed Mounted Dimensions: 12 1/2 lg. x 9 3/4" high x 4" deep (318 mm x 248 mm x 102 mm)
Weight: 20 lbs. (9.0Kgs.)

Suggested Mounting Heights From Floor to Bottom of Dryer
  Men Women Teenagers Children Handicapped
Hand Dryer 40" (102 cm) 38" (97 cm) 36" (91 cm) 30" (76 cm) 32" (81cm)
Hair Dryer 64" (163 cm) 58" (147 cm) 56" (142 cm) 43" (109 cm) 45" (114 cm)


Automatic Sensor Activated Hand Dryers

Excel Hand Dryer HO-IWExcel Hand Dryer R76-IC

FEATURES:

SPECIFICATIONS

 


Construction

  1. Dryer Cover HO-IW & HO-IC Models: shall be one piece, heavy-duty, rib-reinforced die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy, and fastened by two chrome plated tamper-proof bolts to a cast zinc alloy wall plate. R76-IW & R76-IC Models: shall be one piece, heavy-duty, rib-reinforced die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically-applied epoxy, fitted with a fixed, die-cast, chrome plated, zinc alloy nozzle.
  2. The wall plates for surface mounted models shall be equipped with (3) 7/8" (22 mm) diameter holes one of which shall be suitable for use with surface conduit, for ease of wiring. Recessed covers shall be fastened by four flat-head, recessed, tamper- proof bolts to wall box. Wall plate shall be fastened to the wall box by four concealed 1/4” (6mm) mounting bolts, and shall be equipped with two knockouts for ease of wiring.
  3. HO-IW & HO-IC Models: shall have a chrome plated, die-cast zinc air outlet which shall be fixed to the blower housing and shall be of a design that will not allow foreign objects to enter the dryer. R76-IW & R76-IC Models: shall be equipped with an air inlet opening on the bottom of the casting and covered with a vandal resistant metal protective grill to prevent the entry of foreign objects. A fixed chrome plated, die-cast zinc air outlet nozzle on the front of the cover shall permit a full flow of warm air when in operation, and shall be protected by a cast alloy grating fixed into the blower housing.
  4. All internal parts shall be coated according to Underwriters' Laboratories, Inc. requirements.
  5. Entire mechanism shall be internally grounded.
Underwriters' Laboratories, Inc. Listed
The entire dryer shall be listed under the re-examination service of Underwriters' Laboratories, Inc.


Mechanism

  1. Motor for 60 Hz units shall be capacitor-initiated, brushless type (for longer life and quiet operation) 1/10 H.P. 3450 R.P.M. with self- lubricating bearings. It shall be insulated by a resilient mounting and shall be protected by a self-resetting thermal switch. Motor for 50 Hz units shall be a universal 1/10 H.P. 4200 R.P.M. at rated load with sealed lubricated ball bearings. It shall be insulated by a resilient mounting. Motor is thermally protected.
  2. Fan shall be a large, single inlet centrifugal type for maximum capacity, and shall deliver 180 C.F.M. Fan shall be mounted directlyon the motor shaft, and fan and motor unit shall be insulated from dryer with a resilient rubber mounting to obtain maximum dampening effect.
  3. The heating element is constructed of Nichrome wire and side mounted on the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of 145°F/63°C at a 72°F/22°C ambient room temperature at the outlet.
  4. The control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are moving under the air outlet. There is a 90 second lockout feature, if hands are not removed.

Limited Warranty

The dryer shall be guaranteed to be free from defects for a period of ten years, except for three years on the control assembly and sensor. Warranty shall include factory performed labor as well as the repair or exchange of defective parts, at manufacturer's option.

Surface Mounted Dimensions: 12 lg. x 9 34" high x 8" deep (305 mm x 248 mm x 203 mm)
Weight: 17 Lbs. (7.7 Kgs.)
Recessed Mounted Dimensions: 12 1/2 lg. x 9 3/4" high x 4" deep (318 mm x 248 mm x 102 mm)
Weight: 20 lbs. (9.0Kgs.)

Suggested Mounting Heights From Floor to Bottom of Dryer
  Men Women Teenagers Children Handicapped
Surface Mounted 43" (109 cm) 41" (104 cm) 39" (99 cm) 33" (84 cm) 35" (89cm)
Recessed Mounted 40" (102 cm) 38" (97 cm) 36" (91 cm) 30" (76 cm) 32" (81 cm)

 

The market for warm air Hand Dryers is growing at a rapid pace for a number of reasons, as follows:

90% Cost Savings vs. Paper Towels
The energy to operate a hand dryer is less than 10% of the cost of paper towels, including the elimination of associated labor costs for ordering, storing, replenishing dispensers, collecting and disposing of paper towels. Here are some typical savings examples:

For a Family Restaurant
Using 30 cases of paper towels @ $22.50/case plus freight, tax and labor costs
Paper Towel Cost $1,012.50/yr.
Hand Dryer Operating Cost -$52.80/yr.
Annual Savings $959.70/yr.

 

For a Public Middle School
Using 230 cases of paper towels @ $18.00/case plus freight, tax and labor costs.
Paper Towel Cost $6,210.00/yr.
Hand Dryer Operating Cost -$404.80/yr.
Annual Savings $5,805.20/yr.

A cost savings analysis worksheet is available to help you determine the effect of converting from paper towels to Excel hand dryers. Just take a few minutes to analyze the impact on your own facility.

Secure Online Ordering
Delivery time: typically ships in 5-6 working days or less.  The transit time to you depends on your physical location and your selected UPS/FedEx shipping method, the cost of which will be displayed in your shopping cart.
Item ID Catalog # Description Place Order

Push Button Hand Dryer Surface Mounted White Epoxy Painted

EXCEL10032 76-W-120-15 Excel Dryer Cast Cover Model Hand Dryer - Push Button Activated - Surface-Mounted - White Epoxy Paint - 120 Volt - 15 Amp - 60 Hz Order
EXCEL10033 76-W-120-20 Excel Dryer Cast Cover Model Hand Dryer - Push Button Activated - Surface-Mounted - White Epoxy Paint - 120 Volt - 20 Amp - 60 Hz Order
EXCEL10003 76-W-208 Excel Dryer Cast Cover Model Hand Dryer - Push Button Activated - Surface-Mounted - White Epoxy Paint - 208/230 Volt - 10 Amp - 60 Hz Order
EXCEL10034 76-W-277 Excel Dryer Cast Cover Model Hand Dryer - Push Button Activated - Surface-Mounted - White Epoxy Paint - 277 Volt - 8 Amp - 60 Hz Order

Push Button Hand Dryer Surface Mounted Chrome Plated

EXCEL10035 76-C-120-15 Excel Dryer Cast Cover Model Hand Dryer - Push Button Activated - Surface-Mounted - Chrome Plated - 120 Volt - 15 Amp - 60 Hz Order
EXCEL10036 76-C-120-20 Excel Dryer Cast Cover Model Hand Dryer - Push Button Activated - Surface-Mounted - Chrome Plated - 120 Volt - 20 Amp - 60 Hz Order
EXCEL10037 76-C-208 Excel Dryer Cast Cover Model Hand Dryer - Push Button Activated - Surface-Mounted - Chrome Plated - 208/230 Volt - 10 Amp - 60 Hz Order
EXCEL10038 76-C-277 Excel Dryer Cast Cover Model Hand Dryer - Push Button Activated - Surface-Mounted - Chrome Plated - 277 Volt - 8 Amp - 60 Hz Order

Push Button Hand Dryer Recess Mounted White Epoxy Painted

EXCEL10039 R76-W-120-15 Excel Dryer Cast Cover Model Hand Dryer - Push Button Activated - Recess-Mounted - White Epoxy Paint - 120 Volt - 15 Amp - 60 Hz Order
EXCEL10040 R76-W-120-20 Excel Dryer Cast Cover Model Hand Dryer - Push Button Activated - Recess-Mounted - White Epoxy Paint - 120 Volt - 20 Amp - 60 Hz Order
EXCEL10041 R76-W-208 Excel Dryer Cast Cover Model Hand Dryer - Push Button Activated - Recess-Mounted - White Epoxy Paint - 208/230 Volt - 10 Amp - 60 Hz Order
EXCEL10042 R76-W-277 Excel Dryer Cast Cover Model Hand Dryer - Push Button Activated - Recess-Mounted - White Epoxy Paint - 277 Volt - 8 Amp - 60 Hz Order

Push Button Hand Dryer Recess Mounted Chrome Plated

EXCEL10043 R76-C-120-15 Excel Dryer Cast Cover Model Hand Dryer - Push Button Activated - Recess-Mounted - Chrome Plated - 120 Volt - 15 Amp - 60 Hz Order
EXCEL10044 R76-C-120-20 Excel Dryer Cast Cover Model Hand Dryer - Push Button Activated - Recess-Mounted - Chrome Plated - 120 Volt - 20 Amp - 60 Hz Order
EXCEL10045 R76-C-208 Excel Dryer Cast Cover Model Hand Dryer - Push Button Activated - Recess-Mounted - Chrome Plated - 208/230 Volt - 10 Amp - 60 Hz Order
EXCEL10046 R76-C-277 Excel Dryer Cast Cover Model Hand Dryer - Push Button Activated - Recess-Mounted - Chrome Plated - 277 Volt - 8 Amp - 60 Hz Order

Automatic Hand Dryer Surface Mounted White Epoxy Painted

EXCEL10047 HO-IW-120-15 Excel Dryer Cast Cover Model Hand Dryer - Automatic Sensor - Surface-Mounted - White Epoxy Paint - 120 Volt - 15 Amp - 60 Hz Order
EXCEL10008 HO-IW-120-20 Excel Dryer Cast Cover Model Hand Dryer - Automatic Sensor - Surface-Mounted - White Epoxy Paint - 120 Volt - 20 Amp - 60 Hz Order
EXCEL10048 HO-IW-208 Excel Dryer Cast Cover Model Hand Dryer - Automatic Sensor - Surface-Mounted - White Epoxy Paint - 208/230 Volt - 10 Amp - 60 Hz Order
EXCEL10049 HO-IW-277 Excel Dryer Cast Cover Model Hand Dryer - Automatic Sensor - Surface-Mounted - White Epoxy Paint - 277 Volt -  8 Amp - 60 Hz Order

Automatic Hand Dryer Surface Mounted Chrome Plated

EXCEL10050 HO-IC-120-15 Excel Dryer Cast Cover Model Hand Dryer - Automatic Sensor - Surface-Mounted - Chrome Plated - 120 Volt - 15 Amp - 60 Hz Order
EXCEL10051 HO-IC-120-20 Excel Dryer Cast Cover Model Hand Dryer - Automatic Sensor - Surface-Mounted - Chrome Plated - 120 Volt - 20 Amp - 60 Hz Order
EXCEL10052 HO-IC-208 Excel Dryer Cast Cover Model Hand Dryer - Automatic Sensor- Surface-Mounted - Chrome Plated - 208/230 Volt - 10 Amp - 60 Hz Order
EXCEL10053 HO-IC-277 Excel Dryer Cast Cover Model Hand Dryer - Automatic Sensor- Surface-Mounted - Chrome Plated - 277 Volt - 8 Amp - 60 Hz Order

Automatic Hand Dryer Recess Mounted White Epoxy Painted

EXCEL10054 R76-IW-120-15 Excel Dryer Cast Cover Model Hand Dryer - Automatic Sensor - Recess-Mounted - White Epoxy Paint - 120 Volt - 15 Amp - 60 Hz Order
EXCEL10055 R76-IW-120-20 Excel Dryer Cast Cover Model Hand Dryer - Automatic Sensor - Recess-Mounted - White Epoxy Paint - 120 Volt - 20 Amp - 60 Hz Order
EXCEL10012 R76-IW-208 Excel Dryer Cast Cover Model Hand Dryer - Automatic Sensor - Recess-Mounted - White Epoxy Paint - 208/230 Volt - 10 Amp - 60 Hz Order
EXCEL10056 R76-IW-277 Excel Dryer Cast Cover Model Hand Dryer - Automatic Sensor - Recess-Mounted - White Epoxy Paint - 277 Volt - 8 Amp - 60 Hz Order

Automatic Hand Dryer Recess Mounted Chrome Plated

EXCEL10057 R76-IC-120-15 Excel Dryer Cast Cover Model Hand Dryer - Automatic Sensor - Recess-Mounted - Chrome Plated - 120 Volt - 15 Amp - 60 Hz Order
EXCEL10058 R76-IC-120-20 Excel Dryer Cast Cover Model Hand Dryer - Automatic Sensor - Recess-Mounted - Chrome Plated - 120 Volt - 20 Amp - 60 Hz Order
EXCEL10011 R76-IC-208 Excel Dryer Cast Cover Model Hand Dryer - Automatic Sensor - Recess-Mounted - Chrome Plated - 208/230 Volt - 10 Amp - 60 Hz Order
EXCEL10059 R76-IC-277 Excel Dryer Cast Cover Model Hand Dryer - Automatic Sensor - Recess-Mounted - Chrome Plated - 277 Volt - 8 Amp - 60 Hz Order

Push Button Hair Dryer Surface Mounted White Epoxy Painted

EXCEL10060 H76-W-120-15 Excel Dryer Cast Cover Model Hair Dryer - Push Button Activated - Surface-Mounted - White Epoxy Paint - 120 Volt - 20 Amp - 60 Hz Order
EXCEL10006 H76-W-120-20 Excel Dryer Cast Cover Model Hair Dryer - Push Button Activated - Surface-Mounted - White Epoxy Paint - 120 Volt - 20 Amp - 60 Hz Order
EXCEL10061 H76-W-208 Excel Dryer Cast Cover Model Hair Dryer - Push Button Activated - Surface-Mounted - White Epoxy Paint - 208/230 Volt - 10 Amp - 60 Hz Order
EXCEL10062 H76-W-277 Excel Dryer Cast Cover Model Hair Dryer - Push Button Activated - Surface-Mounted - White Epoxy Paint - 277 Volt - 8 Amp - 60 Hz Order

Push Button Hair Dryer Surface Mounted Chrome Plated

EXCEL10009 H76-C-120-15 Excel Dryer Cast Cover Model Hair Dryer - Push Button Activated - Surface-Mounted - Chrome Plated - 120 Volt - 15 Amp - 60 Hz Order
EXCEL10063 H76-C-120-20 Excel Dryer Cast Cover Model Hair Dryer - Push Button Activated - Surface-Mounted - Chrome Plated - 120 Volt - 20 Amp - 60 Hz Order
EXCEL10064 H76-C-208 Excel Dryer Cast Cover Model Hair Dryer - Push Button Activated - Surface-Mounted - Chrome Plated - 208/230 Volt - 10 Amp - 60 Hz Order
EXCEL10065 H76-C-277 Excel Dryer Cast Cover Model Hair Dryer - Push Button Activated - Surface-Mounted - Chrome Plated - 277 Volt - 8 Amp - 60 Hz Order

Push Button Hair Dryer Recess Mounted White Epoxy Painted

EXCEL10066 RH76-W-120-15 Excel Dryer Cast Cover Model Hair Dryer - Push Button Activated - Recess-Mounted - White Epoxy Paint - 120 Volt - 15 Amp - 60 Hz Order
EXCEL10067 RH76-W-120-20 Excel Dryer Cast Cover Model Hair Dryer - Push Button Activated - Recess-Mounted - White Epoxy Paint - 120 Volt - 20 Amp - 60 Hz Order
EXCEL10068 RH76-W-208 Excel Dryer Cast Cover Model Hair Dryer - Push Button Activated - Recess-Mounted - White Epoxy Paint - 208/230 Volt - 10 Amp - 60 Hz Order
EXCEL10069 RH76-W-277 Excel Dryer Cast Cover Model Hair Dryer - Push Button Activated - Recess-Mounted - White Epoxy Paint - 277 Volt - 8 Amp - 60 Hz Order

Push Button Hair Dryer Recess Mounted Chrome Plated

EXCEL10070 RH76-C-120-15 Excel Dryer Cast Cover Model Hair Dryer - Push Button Activated - Recess-Mounted - Chrome Plated - 120 Volt - 15 Amp - 60 Hz Order
EXCEL10071 RH76-C-120-20 Excel Dryer Cast Cover Model Hair Dryer - Push Button Activated - Recess-Mounted - Chrome Plated - 120 Volt - 20 Amp - 60 Hz Order
EXCEL10072 RH76-C-208 Excel Dryer Cast Cover Model Hair Dryer - Push Button Activated - Recess-Mounted - Chrome Plated - 208/230 Volt - 10 Amp - 60 Hz Order
EXCEL10073 RH76-C-277 Excel Dryer Cast Cover Model Hair Dryer - Push Button Activated - Recess-Mounted - Chrome Plated - 277 Volt - 8 Amp - 60 Hz Order